CP2102 USB 2.0 to UART TTL 5PIN Module Serial Converter [ElectricA]

CP2102 chip is a single chip USB to UART bridge IC. It requires minimal external components. CP2102 can be used to migrate legacy serial port based devices to USB.

Features:-
Stable and reliable chipset CP2102.
USB specification 2.0 compliant with full-speed 12Mbps.
Baud rates: 300 bps to 1.5 Mbps
Byte receive buffer; 640 byte transmit buffer.
Hardware or X-On/X-Off handshaking supported.
USB suspend states supported via SUSPEND pins.

Temperature Range: -40 to +85.
Size: 42mm X 15mm.
Weight: 4g

Pinouts:-
TX = Connect to Transmit Pin(TXD) of Micro controller. This pin is RX pin of CP2102 on board.
RX = Connect to Receive Pin(RXD) of Micro controller. This pin is TX pin of CP2102 on board.
GND = Should be common to microcontroller ground.
3V3 = Optional output to power external circuit up to 50mA.
5V = Optional output to power external circuit up to 100mA

Driver download :
https://www.silabs.com/developers/usb-to-uart-bridge-vcp-drivers

Notes:
Some PC can direct plug and play, some need to download the driver, it's all depends on the operating system and environment.