TXS0108E 8 Channel Logic Level Converter High Speed Full Duplex 8-Bit Bidirectional [ElectricA]

TXS0108E High-Speed Full-Duplex 8 Channel Logic Level Converter.
This bi-directional logic level converter is a small device to convert the 1.8V 3.3V 5V logic level mutually enable you to successfully set your high and low voltages and step up and down between them safely on the same channel.

Each level converter has the capability of converting 8 pins on the high side to 8 pins on the low side. The level converter provides the serial interface compatible with UART/IIC/SPI port is very easy to use.

This 8-bit non-inverting translator uses two separate configurable power-supply rails. The A port tracks the VCCA pin supply voltage. The VCCA pin accepts any supply voltage between 1.2 V and 3.6 V. The B port tracks the VCCB pin supply voltage.

The VCCB pin accepts any supply voltage between 1.65 V and 5.5 V. Two input supply pins allow for low Voltage bidirectional translation between any of the 1.2 V, 1.8 V, 2.5 V, 3.3 V, and 5 V voltage nodes.

Specification:
8 digit bi-directional 3.3V-5V/5V-3.3V logic level converter board.
It can bidirectionally transfer with 8 channels between high logic voltage and low logic voltage.
VCCA side voltage range: 1.2V-3.6V; VCCB side voltage range: 1.65v-5.5v
Serial communication interface is compatible with UART/IIC/SPI port, which is easy to connect.
Widely used in the communication between 5V SCM and 3.3V device, 3.3V SCM and 5V device. It can also apply in the level conversion between MCU and SD card, MCU and iic/spi serial port devices.