8x8 LED RGB Matrix Module Driver Board Full-color Arduino

NAME

8x8 LED RGB Matrix Screen Module Driver Board Full-color Arduino

DESCRIPTION

· Product Features:

o 6 bit color support

o Support for hardware 16MHZ PWM

o No external circuitry

o Dedicated GPIO and ADC Interface

o Support for hardware URAT and IIC communication

o 24 -channel constant current channel current up to 100mA per channel

o 8 -channel constant current source driver current up to 500mA per channel

o Power Supply: 5-5.3V

o Current: Max 300mA

o Operating Temperature Range: -10 ℃~ +50 ℃

· Hardware Features:

o Support for multiple cascaded without hardware setup

o RGB color display and supports three kinds of mixed colors

o Dot sequence using Cartesian coordinate system, easy to understand

o Arduino development board supporting separate power supply or an external power supply

o When multiple cascading use, if the color is too dark, the supply voltage can be increased to about 5.2v. Do not exceed 5.4V

o When multiple cascading, all data lines connected to the 1st sub- board. (The origin (0,0) where the sub-board for the 1st sub-board)

SHORT DESCRIPTION

Full-color RGB matrix driver board is a dedicated full-color RGB matrix designed a Arduino control board module, which in addition to RGB matrix independently driven, but also can be used as an Arduino control panel to use. Very convenient and practical, on-board chip is ATmega 328 chip, board above also raises the ISP interface, you can always give 328 chip burning boot loader.