LM358P LM358N Dual Operational Amplifier Op-Amp DIP IC 8-Pin Adjustable Amplification Module Operational LM358 LM 358

LM358P/LM358N IC

http://www.ti.com/lit/ds/symlink/lm358.pdf

These devices consist of two independent, high-gain, frequency-compensated operational amplifiers designed to operate from a single supply over a wide range of voltages. Operation from split supplies also is possible if the difference between the two supplies is 3 V to 32 V, and VCC is at least 1.5 V more positive than the input common-mode voltage. The low supply-current drain is independent of the magnitude of the supply voltage.

- Wide supply voltage ranges
- Low supply-current drain independent of supply voltage
- Common-mode input voltage range includes ground, allowing direct sensing near ground
- Low input bias and offset parameters
- Internal frequency compensation

Applications

Sensing & Instrumentation, Communications & Networking, Audio

No. of Amplifiers: 2 Amplifier

Bandwidth: 700kHz

Slew Rate: 0.4V/µs

Supply Voltage Range: ± 1.5V to ± 16V

Amplifier Case Style: DIP

No. of Pins: 8Pins

Operating Temperature Min: 0°C

Operating Temperature Max: 70°C

LM358P AMPLIFIER MODULE

This amplifier module is based on the LM358 operational amplifier which is a high-gain, frequency compensated operational amplifier designed to operate from a single power supply over a wide range of voltages. It is used in conventional operational amplifier circuits that need to be operated from a single power rail.

SPECIFICATIONS
On-board LM358 chip
Adjustable gain up to 100x
On-board 10K adjustable resistor for gain adjustment
On-board power indicator
Chip has been drawn out to the main pins for direct input and output of signals
Working Voltage Range: 5 V to 12 V
Board Size: 32.7 x 13.3 mm