XY-L10A 6-60v 10A Lead-acid Solar Storage Battery Charge Controller Module Protection Board charger Time Switch Battery

XY-L10A 6-60v 10A Lead-acid Solar Storage Battery Charge Controller Module Protection Board charger Time Switch Battery Capacity

Product name: CNC charging module
Product model: XY-L10A
Control voltage: DC6-60V
Control current: ≤10A
Control accuracy: 0.1V
output type: direct output
Voltage error: ±0.1V
Scope of application: various lithium batteries
Appearance size: 79mm * 42mm

Module Highlights:
Support Lead-acid battery and Acting Battery,voltage range:6V~60V;
Can display voltage,percent of battery,charging time at the same time through LCD;
The function is very powerful,realizes the automatic charge control,the control charge time, also may set up and uploads the corresponding parameter through the serial port;

Function description
1.Automatic Charge control function：
By setting the volt-HI:‘UP’ volt-LI:‘dn’;When the battery voltage is below the volt-LI:’dn’,the relay leads,the charger begins to charge the battery;when the battery voltage is up to volt-HI:’UP’,the relay is diconnected and the automatic charge is completed once;

2.Charge Time Control Function:
How to turn on the time control function?
After entering the parameter set, set the parameter op is non-zero, then turn on the time control function, op default parameter is:--:--h, the default does not turn on time control function;
After the opening Time control function (OPis non-zero), when the battery voltage is the lower volt-LI’dn’, the charger began to charge the battery, the system began to clock; During the timing, the battery voltage ≥ volt-HI’UP’, relay disconnect; If theOPtime is up, the battery voltage is still the lower volt-LI’dn’, the relay keeps the conduction, automatically closes the charge time control function, and flashes theH:ERto remind the user, the time parameter setting is unreasonable; Press any key to stop flashing;

Note: Time format: 00:59 (00 for hours, 59 for minutes) The maximum time is 99:59, which is 100 hours.

3.Serial data upload and parameter setting function:
The system supports UART data upload and parameter setting
UART：115200,8,1
command           Features
on                         Relays enable to open
off                        Relays disable to open
start                     Start data upload
stop                      Stop data upload
read                      Read the param setting
dw10.0                 Set volt-LI:’dn’
up20.0                  Set volt-HI:’UP’
xx:xx                     Set the charge time OP，00:00 stop charge time

Data Upload message Format:
Battery voltage + battery percent + charge time + charge status 12.0V,020%,00:10,OP
Due to the limitation of text input of product details, please see the product link picture for more detailed introduction of product functions! ! !


#XY-L10A #6-60v #10A #Lead-acid #Solar #Storage #Battery #Charge #Controller #Module #Protection #Board #charger #Time #Switch #Battery #Capacity