1 PCS - Heating Tube

Heating Tubes
This is a slender, electrically-powered tube used in 3D printers to generate heat. It's situated within the printer's hotend assembly and heats up to the required temperature for melting and extruding filament material. This melted material is then precisely deposited layer by layer to create 3D-printed objects. The heating tube's consistent and controlled heat is essential for successful and accurate 3D printing.

Details: 
● Diameter: 6mm.
● Length of Wire: 1/2m
● Voltage: 12V/24V.
● Power: 40W/50W

Size:
● (A) 12V 50W 60*20，White heating tube, with 100cm wire. (C0385)
● (B) 24V 50W 60*20，White heating tube, with 100cm wire, (C0386)
● (C)12V 50W 60*20，White heating tube, with 200cm wire. (C0387)
● (D) 24V 50W 60*20，White heating tube, with 200cm wire. (C0388)
● (E) 12V 40W 60*20，with 100cm wire. (A0389)
● (F) 24V 40W 60*20，with 100cm wire. (C0390)
● (G) 12V 40W 60*30，with 100cm wire. (C0391)
● (H) 24V 40W 60*30，with 100cm wire. (C0392)

Instructions:
● The effective heating part of the heater must keep dry.
● The electrical connector of the single-ended heater should be placed out of the insulation layer and heating room, and the working voltage shall not exceed its rated value of 10%. The shell should be effectively grounded.
● Electric components working environment, the temperature should not be greater than 95 degrees, no explosive or corrosive gases.
● Electric components should be stored in a dry place

Improvements:
● From the original ordinary 0.3-line high-temperature line to 0.5-line thick white high-temperature line, can bear higher temperature, and looks more beautiful.
● From the original 40W power to 50W, therefore, the maximum temperature increases from 300-31℃ to 340-350℃ or so.
● The new version heater used in all imported skills, the use of 304 stainless steel, with the internal use of 2080 nickel chrome wire to achieve maximum service life.
● Support the customization of different specifications, length, resistance of the heater.
● Can be used with the new HT-NTC100K temperature thermistor (Temperature measurement can be up to 350 degrees).