(+1Month Warranty) PL2303 USB to TTL Serial UART RS232 Cable Adapter [ElectricA]

Easy to connect to your microcontroller/Raspberry Pi/WiFi router serial console port.
Big USB plug is a USB to Serial conversion chip and at the end of the 1M cable are four wire red power, black ground, white RX into the USB port, and green TX out of the USB port.

The power pin provides the 5V @ 500mA direct from the USB port and the RX/TX pins are 3.3V levels for interfacing with the most common 3.3V logic level chipsets.

Because of the separated pin plugs, this cable is ideal for powering and connecting up to the debug/login console on the Raspberry Pi or BeagleBone Black.

Also handy for hacking WiFi routers to install alternate OSs, or nearly any other 3.3V logic serial port.
This is easier to use than an FTDI cable in many cases because the wires are separated.

Not Supported OS: Windows 8/8.1/10/11

Feature
This is another USB to TTL cable that use as an UART or arduino pro mini programmer. This TTL doesn't need any jumper wire.

Specification
chipset: PL2303
cable: red (Vcc)
black(GND)
White (RXD)
Green (TXD)

Package content
1 x PL2303 USB to TTL