CP2104 USB 2.0 To TTL UART 6PIN Serial Converter Module STC PRGMR [ElectricA]

1. Update of all the types of receivers of a satellite signal.
2. For update and modification of the firmware of the Router, hard disk, ADSL, mobile...
3. Repair easily hard drive SEAGATE BArracuda debrick firmware
4. Phones , XBOX360, GPS communication, , DVD flash, etc
5. Writing, STC, SMC, SMC, NXP, microcontroller, Renesas, microchip, NEC, etc
6. Communication through the Super Terminal, for common use of the serial port.
7. For electronics you can use the signal of USB comoTTL

cp2104 PC USB serial converter USB uart ttl 6 pin 
COM port cp210x compatible with the driver, cp2102 

Specifications:
Converter Chip for USB transfer rs232
Designed to be used in electronics projects.
TTL interface output, easy to connect to your mcu.
Led state.
Dual output 3.3 v and 5v power can work with 3.3 v and 5v target device.

The package includes:
Usb 1x 2.0 to ttl 6 uart module pins
5 cable pc Dupond
Converter CP2104 USB-to-TTL
Converter USB to TTL high-quality at a great price, comes with a extender cable 4-pin.

Features:
Chipset stable and reliable CP2104.
USB 2.0 specification compatible with 12Mbps high-speed.
Standard USB type A male and connector TTL 6-pin.
6-pin to DTR, 3V3, 5V, TXD, RXD, GND
All the interface signals handshake and modem.
Baud rates: 300 bps to 2 Mbps.
Byte receive buffer; 576 byte buffer for transmission.
Compatibility with Hardware or X-On / X-Off.
Support of character event Transfer line break.
States of suspension USB supported via pin SUSPEND.
Temperature range: -40 to +85.
Supports Windows 98SE, 2000, XP, Vista, Windows 7, Windows 8, Mac OS 9, Mac OS X and Linux2.40.

Technical specifications:
100 brand new and high quality
This is a serial converter module USB 2.0 to TTL UART 6PIN CP2104
Designed to be used for electronic projects USB-to-TTL
Output interface TTL, connect easily to your computer
Chip transfer USB-to-RS232 built-in
USB 2.0 specification compatible with 12Mbps high-speed
Standard USB type A male and connector TTL 6-pin. 6 pins for 3.3 V, RST, TXD, RXD, GND and + 5V
Support of character event Transfer line break
States of suspension USB supported via a PIN SUSPENDED
Supports Windows 98SE, 2000, XP, Vista, Window7, Windows 8 and Windows 10 Mac OS X and Linux 2.40
Dimension: 52 mm x 17 mm (LxW)
use the same controller that the module CP2102