Grove to JST-SH(qwiic) Cable for Maker Nano RP2040- 20cm

⭐️⭐️⭐️ Grove to JST-SH(qwiic) Cable -20cm ⭐️⭐️⭐️

⭐️ Looking for extra Grove to JST-SH (Qwiic) cable for your Maker Nano RP2040? 
This 20cm long cable is a fantastic chimera-cable fitted with STEMMA QT / Sparkfun Qwiic JST SH on one end, and a Grove connector on the other. This cable can be used with STEMMA or STEMMA QT / Qwiic boards to easily connect sensors and drivers from one board to the other.



⭐️ The Qwiic connect system is an ecosystem of I2C sensors, actuators, shields, and cables that make prototyping faster and less prone to error. All Qwiic-enabled boards use a common 1mm pitch, 4-pin JST connector. This reduces the amount of required PCB space, and polarized connections mean you can’t hook it up wrong.

❗️Note: You will have to watch for voltages on the power/signal pin when using 3V-only Qwiic sensors with this cable!

You can use this to connect any Grove I2C sensor (3-5V) to an I2C host with STEMMA QT or Qwiic connectors (3V)
You can use this to connect any STEMMA QT (3-5V) sensor to Grove or STEMMA host (5V) board, and vice versa

❗️Warning: If you want to connect a Qwiic board (3V power only!) to a Grove or STEMMA host, make sure the power switch is set to 3V

❗️Note: The Grove system has a variety of different signal systems that use the same connector. This cable only works with the I2C variety.

⭐️ Wire color indicators ⭐️ 
	📌 Black for GND
	📌 Red for V+
		For Qwiic boards, 3.3V.
		For STEMMA QT, 3 to 5V.
	📌 Blue for SDA
	📌 Yellow for SCL

⭐️ Specifications ⭐️
	📌 Cable Length: 20 cm
	📌 Current rating: 1.0A (AWG#28)
	📌 Voltage Rating: 50V
	📌 Pitch: 1mm
	📌 Grove to JST-SH Connector
	📌 4-pin JST connector

⭐️ Packing list ⭐️
	📦 1 x Grove to JST-SH(qwiic) Cable - 20cm


📩 Email us at [email protected] for technical support 😊
☎️ Call us at 04-548 0668
🚚 Free shipping WITHOUT min. purchase for students & teachers (ONLY applicable on website purchase) 🤩
💻 Visit us at my.cytron.io for more product choices 😊