Piunora Raspberry Pi CM4 Carrier Board and Kits

⭐️⭐️⭐️ PIUNORA Carrier Board ⭐️⭐️⭐️  

⭐️ We have included the PIUNORA Carrier Board for the CM4 Wireless module. It enables you to get started with the Raspberry Pi CM4.

⭐️ Piunora is a compact, easy-to-use development board for electronics prototyping with Linux. It has a familiar form factor, legible pin labels, and a design that's well suited to space-constrained applications. As a carrier board for the Raspberry Pi Compute Module 4 (CM4), Piunora is essentially a tiny version of the Raspberry Pi 4 Single Board Computer (SBC) with added flexibility to accommodate custom form factors.

⭐️ In a limited space, the board has been designed to pack with powerful peripherals for rapid prototyping and embedded machine-learning applications. Piunora is open hardware that both the design files and the software is published here.
 
⭐️ It's worth noting that, Piunora is open hardware, fully compatible with Raspberry Pi CM4, as long as that software accounts for the hardware peripherals in use. It allows you to utilize the huge collection of existing drivers for the ecosystem and enables you to develop embedded applications using Piunora as easily as possible.

⭐️ Piunora is an ideal solution for working with Electronics, where it contains Adafruit and SparkFun-developed Qwiic/StEMma-Qt compatible connectors to connect hundreds of high-end sensors quickly and easily through daisy-chain IIC devices via Python. 

⭐️ The board includes a Type-C port that can support a power supply and USB 2.0 data transmission. It consumes less power than the full-featured Raspberry Pi 4 and it can directly be programmed by CircuitPython through a compatibility layer - Adafruit Blinka on Linux SBCs. Additionally, there is an M.2 B-Key connector that it provides a perfect interface for a more compact style of add-on board which means it can be utilized to develop a simple, space-efficient, USB-enabled MCU solution.



 
⭐️⭐️⭐️ The board comes with ⭐️⭐️⭐️




1 x USB-C port for power, and data to load the OS image into the eMMC (for CM4 with built-in eMMC)
1 x Slide switch to configure USB-C's USB mode
1 x USB2.0 Type-A port
1 x Full-Size HDMI 2.0 port
1 x CSI camera-input connector
1 x PCI-e bus which is being breakout into an M.2 B-Key port on the rear of the board. The M.2 B-Key port is not only useful for (NVMe) SSD storage, but it can also host a diverse range of PCI-e expansion boards. 
Support M.2 2242 or 2230 Module
1 x Qwiic/Stemma QT port
2 x Push Buttons (programmable)
2 x Indicator LEDs (Power and Activity)
1 x RGB LED (programmable)
1 x MicroSD Card slot (push latch push release)
GPIO breakout into Arduino UNO form factor
1 x MCP3008,  ADC IC that enables Analog Input right out of the box (with Piunora Image)
1 x CSI port, at the rear of the board
2 x CM4 100-pin socket for stacking CM4
 
⭐️⭐️⭐️ Features and Spec ⭐️⭐️⭐️
📌 Arduino UNO R3 / Adafruit Metro compatible form factor (3.3V IO logic, may not be compatible with all Shields)
📌 PCI-e through M.2 B-Key connector on the rear of the board with dedicated 3.3VDC / 3 A supply
		The M.2 B-Key DOES NOT support M.2 SATA SSD drive
		The M.2 B-Key supports M.2 NVMe SSD drive
📌 Analog to Digital Converter (MCP3008)
📌 On the fly switching between USB host (USB Type-A) and device mode (USB Type-C)
📌 Qwiic/Stemma QT connector to easily interface with I²C devices
📌 A full-sized camera connector (CSI) that supports all Pi-compatible cameras
📌 A full-sized HDMI 2.0 port
📌 A WS2812(Neo-Pixel) Smart RGB LED for user status
📌 Optional Wi-Fi or eMMC options depending on your choice of CM4
📌 Slim design measuring 11-13 mm
📌 Two user-controllable buttons (including software that turns one of them into a safe-shutdown button)
📌 Piunora is open hardware, please get the documentation here.
📌 Power Input: 5V, via USB-C receptor
	
⭐️⭐️⭐️ Packing list ⭐️⭐️⭐️
📦 1 x Raspberry Pi Compute Module 4 (Optional)
 	✅Wireless, onboard 4GB RAM and no eMMC (Lite)
 	✅No Wireless, onboard 2GB RAM and 16GB eMMC
📦 1 x Raspberry Pi Compute Module 4 Piunora Carrier Board
📦 1 x Official Raspberry Pi 15W (5V/3A) USB-C - UK Plug
📦 1 x MakerDisk 32GB microSD card with pre-loaded Raspberry Pi OS
📦 1 x USB 2.0 MicroSD Card Reader/Writer


📩 Email us at [email protected] for technical support 😊
☎️ Call us at 04-548 0668
🚚 Free shipping WITHOUT min. purchase for students & teachers (ONLY applicable on website purchase) 🤩
💻 Visit us at my.cytron.io for more product choices 😊