Maker UNO Learning Box - with Maker UNO

⭐️⭐️⭐️ Maker UNO Learning Box - with Maker UNO ⭐️⭐️⭐️  

⭐️ Arduino is the easiest platform to learn digital making. However, many students, as well as the teachers, still find it difficult to get started and get familiar with Arduino. This could be due to two reasons:
	✅ Most of the students and teachers do not know either electronics or coding or both;
	✅ Most of the beginner's guides and sample codes are developed by technical persons who do not understand the pains of non-technical people.
 
⭐️ A non-technical person who develops this product aims to solve the problem for beginners who want to learn Arduino and digital making for the first time. The learning material is intentionally designed to allow the beginners to see the results (programming output) immediately, get excited then follow by a superficial explanation of how things work. 








⭐️ This product consists of 17 interesting projects that cover 7 fundamental topics in digital making. 
	📌 LESSON 1 DIGITAL OUTPUT
		✅ Project 1: Turn On An LED
		✅ Project 2: Blink An LED
		✅ Project 3: Blink the LEDs In Sequence
	📌 LESSON 2 DIGITAL INPUT
		✅ Project 4: On-board Pushbutton Switch
		✅ Project 5: External Pushbutton Switch
	📌 LESSON 3 ANALOG OUTPUT
		✅ Project 6: Construct An LED Circuit
		✅ Project 7: Fade An LED
	📌 LESSON 4 MELODY TONE
		✅ Project 8: Compose Basic Tone
		✅ Project 9: Compose "Happy Birthday" Melody
		✅ Project 10: Optimize Your Codes
	📌 LESSON 5 ANALOG INPUT
		✅ Project 11: Display Analog Value On Serial Monitor
		✅ Project 12: Read Analog IR Sensor
		✅ Project 13: IR Sensor To Detect Black Line
	📌 LESSON 6 DC MOTOR
		✅ Project 14: Control A DC Motor
		✅ Project 15: Controlling A Motor Speed Using A Pushbutton
	📌 LESSON 7 ULTRASONIC SENSOR
		✅ Project 16: Setting Up Ultrasonic Sensor
		✅ Project 17: Build A Car's Rear Bumper Sensor

⭐️⭐️⭐️  Packing list ⭐️⭐️⭐️ 
	📦 1 x Maker UNO
	📦 1 x 3V Miniature Brush Motor
	📦 1 x DIY 4 Blades Motor Propeller (blue)
	📦 1 x SR04 Ultrasonic Sensor
	📦 1 x IR Line Sensor
	📦 3 x LED 5mm Red
	📦 3 x LED 5mm Yellow
	📦 3 x LED 5mm Green
	📦 3 x Pushbutton Switch
	📦 10 x Resistor 220 Ohm
	📦 10 x Resistor 1K Ohm
	📦 10 x Resistor 10K Ohm
	📦 1 x Diode 1N4007
	📦 2 x Transistor 2N2222
	📦 1 x Finger Preset 10K
	📦 1 x 40 Ways Male to Male Jumper
	📦 1 x 40 Ways Male to Female Jumper
	📦 1 x Micro B USB Cable
	📦 1 x Breadboard 8.5cm x 5.5cm

📩 Email us at [email protected] for technical support 😊
☎️ Call us at 04-548 0668
🚚 Free shipping WITHOUT min. purchase for students & teachers (ONLY applicable on website purchase) 🤩
💻 Visit us at my.cytron.io for more product choices 😊