Maker UNO X Learning Box - Arduino Compatible comes with 7-lesson User Guide

⭐️⭐️⭐️ Maker UNO X Learning Box ⭐️⭐️⭐️

NOTE:  Compatibility Notice
Please be advised that the USB to Serial driver for this product is not compatible with Windows 7. We recommend using a more recent version of Windows to ensure proper functionality and support. If you have any questions or need further assistance, please contact our customer support team.

Arduino is the easiest platform to learn digital making. However, many students, as well as the teachers, still find it is difficult to get started and get familiar with Arduino. This could due to two reasons:
	📌 Most of the students and teachers do not have knowledge in either electronics or coding or both;
	📌 Most of the beginner's guide and sample codes are developed by technical persons who do not understand the pains of non-technical people.

This product is developed by a non-technical person aims to solve the problem for beginners who want to learn Arduino and digital making for the first time. The learning material is intentionally designed to allow the beginners to see the results (programming output) immediately, get excited then follow by the superficial explanation on how things work.  

1. Copy the codes given blindly. Upload the code to the board. See the result immediately, get excited.



2. Codes are explained line by line using the layman language.



3. Learn extra electronics knowledge and coding syntax if you want.



This product consists of 17 interesting projects that cover 7 fundamental topics in digital making. 
 


📌 LESSON 1 DIGITAL OUTPUT
	Project 1: Turn On An LED
	Project 2: Blink An LED
	Project 3: Blink the LEDs In Sequence
📌 LESSON 2 DIGITAL INPUT
	Project 4: Onboard Pushbutton Switch
	Project 5: External Pushbutton Switch
📌 LESSON 3 ANALOG OUTPUT
	Project 6: Construct An LED Circuit
	Project 7: Fade An LED
📌 LESSON 4 MELODY TONE
	Project 8: Compose Basic Tone
	Project 9: Compose "Happy Birthday" Melody
	Project 10: Optimize Your Codes
📌 LESSON 5 ANALOG INPUT
	Project 11: Display Analog Value On Serial Monitor
	Project 12: Read Analog IR Sensor
	Project 13: IR Sensor To Detect Black Line
📌 LESSON 6 DC MOTOR
	Project 14: Control A DC Motor
	Project 15: Controlling A Motor Speed Using A Pushbutton
📌 LESSON 7 ULTRASONIC SENSOR
	Project 16: Setting Up Ultrasonic Sensor
	Project 17: Build A Car's Rear Bumper Sensor


⭐️⭐️⭐️ Packing list ⭐️⭐️⭐️ 
	📦 1 x  Maker UNO X
	📦 1 x 3V Miniature Brush Motor
	📦 1 x DIY 4 Blades Motor Propeller (blue)
	📦 1 x 3 - 5.5V SR04 Ultrasonic Sensor (after 18th Mar 2021)
	📦 1 x IR Sensor Module
	📦 3 x LED 5mm Red
	📦 3 x LED 5mm Yellow
	📦 3 x LED 5mm Green
	📦 3 x Pushbutton Switch
	📦 10 x Resistor 220 Ohm
	📦 10 x Resistor 1K Ohm
	📦 10 x Resistor 10K Ohm
	📦 1 x Diode 1N4007
	📦 2 x Transistor 2N2222
	📦 1 x Finger Preset 10K
	📦 1 x 40 Ways Male to Male Jumper
	📦 1 x 40 Ways Male to Female Jumper
	📦 1 x Micro B USB Cable
	📦 1 x Breadboard 8.5cm x 5.5cm

📩 Email us at [email protected] for technical support 😊
☎️ Call us at 04-548 0668
🚚 Free shipping WITHOUT min. purchase for students & teachers (ONLY applicable on website purchase) 🤩
💻 Visit us at my.cytron.io for more product choices 😊