(+1Month Warranty) W1209 12V LED Digital Thermostat Temperature Thermometer Controller Switch Module +NTC Sensor XHW1209

Technical details.:
Control range.: - 50c ~ 110c.
Input power: Dc 12v
Resolution display: 9.9c to 99.9c with 0.1c resolution.. Other temperatures
Ranges - 50c ~ 110c 1c display resolution
Measuring inputs: Ntc (10k 0.5%) Waterproof sensor with 0.5 meters cable
Measurement accuracy: 0.1 or 1.0 dependent on range selected
Output relay: 1 pole 1 way (No.) 10a 150v ac relay led indicator shows when relay
Is active.
Control accuracy.: Also 0.1c
Adjustable hysteresis
Hysteresis accuracy.: 0.1c.
Size: 48mm x 40mm x 18mm
Refresh rate: 0.5 seconds
Power consumption.: Static current: 65ma
Type display: 0.8cm three digital led seven segment display with adjacent relay
Active led indicator

How to use:
Connect the power supply provided and the load through the relay connections
Marked k0 and k1.
The present temperature at the probe is displayed.
Press the set button.. The display flashes the trip temperature.
Press + Or - to set the desire trip temperature.
Press set to confirm your temperature setting
The controller automatically changes the relay setting to off if the trip
Temperature is below the present temperature with hysteresis
When the relay is off (Open circuit.) The led indicator will be off
If the seven segment led display shows:
Ll the temperature sensor leads are open circuit.
Hh the probe detects a temperature out of its range.
When out of range the thermostat will be forces to close the relay and it will
Display - - high temperature protection.