SUMO:BIT - Sumo Robot Expansion Board for micro:bit

⭐️⭐️ SUMO:BIT - Sumo Robot Expansion Board for micro:bit ⭐️⭐️
 
Want to participate in a Sumo robot competitions but you’re a complete beginner? Or want to try controlling a Sumo robot using a micro:bit mainboard? SUMO:BIT is here to the rescue! 

Program your SUMO:BIT with Microsoft MakeCode Editor graphical programming interface. Just install SUMO:BIT MakeCode Extension and you may start to code your projects. If you’re a beginner, you can start with the block programming mode; simply drag, drop & snap the coding blocks together. For more advanced users, you can easily switch into JavaScript or Python mode on MakeCode Editor for text-based programming.

Designed for micro:bit, beginner friendly, easy drag and drop code with MakeCode for autonomous Sumo robot
Co-processed by Raspberry Pi RP2040

Detachable MD13S motor driver, replace without hassle whenever needed
Powerful Motor Driver that supports up to 13A (continuous) motors and 30A peak current.

Mode interchangeable without reprogramming.
USB host for wireless USB joystick, easily interchangeable between autonomous and remote-controlled within seconds!
Onboard motor alignment adjust and calibration
4-way DIP switch for 16 different winning strategies!

⭐️⭐️SUMO:BIT Specifications ⭐️⭐️
​​​​​​✅ Power Input Voltage (LiPo Battery):
✅ Min: 7V
✅ Max: 25V
✅ Motor PWM Frequency (when connected with MD13S): 20KHz
✅ Maximum DC Motor Current each Channel (when connected with MD13S): 13A
✅ Peak Motor Current each Channel (when connected with MD13S: 30A  ⚠️must not exceed 10 seconds⚠️
✅ USB Host Output Voltage: 5V
✅ USB Host Output Current: 600mA
✅ Servo Voltage: 5V
✅ +5V Output Maximum Current (Total): 600mA
Note: This board is designed to be optimally used with the MD13S motor driver. These maximum ratings are based on the assumption that the SUMO:BIT is connected to the MD13S motor driver boards. You may refer to the MD13S motor driver user manual for further information.


⭐️⭐️ MD13S Motor Driver Specifications ⭐️⭐️
✅ Bi-directional control for 1 brushed DC motor
✅ Support motor voltage from  6V to 30VDC
✅ Maximum current up to 13A continuous and 30A peak (10 seconds)
✅ 3.3V and 5V logic level input.
✅ Solid state components provide faster response time and eliminate the wear and tear of mechanical relay
✅ Fully NMOS H-Bridge for better efficiency and no heat sink is required
✅ Regenerative Braking
✅ Speed control PWM frequency up to 20KHz (Actual output frequency is same as input frequency)
✅ Support both locked-antiphase and sign-magnitude PWM operation, *NOT RC (Radio Control) PWM
✅ SMD compatible
✅ RoHS, FCC and CE compliance
✅ Dimension: 61mm x 33mm


📩 Email us at [email protected] for technical support 😊
☎️ Call us at 04-548 0668
🚚 Free shipping WITHOUT min. purchase for students & teachers (ONLY applicable on website purchase) 🤩
💻 Visit us at my.cytron.io for more product choices 😊