PikaBot Arduino Maker UNO Educational Mobile Robot RBT Form 3 Line Following Obstacle Avoidance High Quality READY STOCK

What can your PikaBot do? It can follow line, simple yet practical navigation that is widely used in AGV (Automated Guided Vehicle) and many robot competition. The kit comes with a pair of infrared sensors that you can calibrate/teach it to recognize black and white surfaces. Calibration is fairly straight forward by tuning a potentiometer on the sensor itself. And we have also prepared the sample code to do that!

PikaBot also includes an ultrasonic distance sensor so it can measures distance in front of it. With that, it can further avoid obstacle which is near to it.

Features:

📌Mobile Robot Kit
📌Do It Yourself (DIY) mobile robot kit
📌No soldering needed, only requires to connect jumper wires :)
📌Controller: Maker UNO
📌Motor Driver: Maker Drive dual-channel DC brush motor driver
📌Driven by two TT motor with pre-solder wires
📌Power both controller and motor with 4 x AA battery, with battery holder too
📌Comes with IR Line Sensor module, for line following
📌Open-source example code, free to modify and learn coding
📌Panel mount rocker switch as power activation switch
📌Panel mount push button as a start button
📌The paper box is creatively designed as the container and also body for mobile robot.
📌Everything needed is packed in this kit!
📌Box Dimension: 127mm x 55mm x 19mm (not including motor shafts and wheels)

📦📦Packing List📦📦

- 1 x Maker UNO (Simplifying Arduino for Education)
- 1 x Maker Drive: Dual H-Bridge Motor Driver for Beginner
- 2 x 3 - 6VDC Dual Axis TT Gear Motor (with pre-solder wires)
- 2 x Rubber Wheel for TT Gear Motor (63mm x 15mm)
- 2 x IR Line Tracking Module
- 1 x HC-SR04 Ultrasonic Ranging Module
- 1 x 4xAA Batteries
- 1 x 4xAA battery holder
- 1 x Breadboard Mini (35mmx42mm) - White
- 1 x 40 ways Male to Female Jumper Wire
- 1 x 40 ways Male to Male Jumper Wire
- 1 x USB Micro B cable
- 1 x mBot N20 Vacuum Steel Ball Castor
- 1 x Tiny Phillips Screwdriver - 85mm
- 4 x Bolt M3x25mm
- 4 x M3 Nut
- 1 x CH2 Quick Wiring Terminal Press Type
- 1 x Rocker Switch with wires
- 1 x Push Button with wires
- 14 x Plastic Rivet (M3)
- 2 x Plastic Rivet (M4)
- 1 x PikaBot Track
- 1 x Manual (Booklet of choice)
	-English (Arduino IDE)
	-Bahasa Melayu (mBlock)
- 1 x PikaBot Paper Box

📩 Email us at [email protected] for technical support 😊
☎️ Call us at 04-548 0668
🚚 Free shipping WITHOUT min. purchase for students & teachers (ONLY applicable on website purchase) 🤩
💻 Visit us at my.cytron.io for more product choices 😊