DB15 DB 15 Male/Female Solderless Solderless Connector 2 Row / 3 Row 15 Pin for VGA Port / DB15 Connector Repair Kit

Type A&B

- 15 root signal lines
- Terminal spacing of 5.0 MM, the screw hole diameter of 2.5 MM, need to use the width of 2.5 MM for disassembling a screwdrive
- VGA 3+9 widely use for 3+9/3+7/3+6/3+5/3+4/3+2 VGA cable.
- Foldable housing that can be reused without tools for easy assembly and disassembly
- PCB double-layer circuit design, lead-free instrument welding, environmentally friendly copper terminal blocks.

Type C

- Techmakers introduces our next generation solderless connectors. Innovative, Rugged design and simple, you just need a scredriver and a fraction of time to terminate VGA connector, saving you both time and money. Optimized for use in any A/V application where VGA interface and controls are still normally used. The contacts and terminal blocks are based on the industry standard, striving to deliver reliable A/V application.

The following is the VESA standard for wire colors for a standard VGA cable:
- (V) Vertical: White (or sometimes yellow)
- (H) Horizontal: Black
- (B) Blue
- (G) Green
- (R) Red
- Remaining 5 connectors are GROUNDS for each of the above. (Please take note that some of the VGA cables do not use standard wiring coloring. So,  we would suggest you to use multimeter to test the wire and the pin-outs before doing the termination.

Type D&E

- DB15 Connectors D-SUB Female 2 Row 15 Pin Plug Breakout Terminals Board Connector Screw Type Black Plastic Cover

Description:

Type: DB15 Terminals Plug Screw Type

Terminals Pitch:3.81mm , The screw hole diameter is 2mm, need to use the 2mm width screwdriver for disassembling.

Wire Gauge:19AWG (21 -- 24 AWG will be better, for reference only)

Weight:43g