Cytron Maker pHAT Built-in 8x LEDs 3x Buttons Buzzer Remote Serial SSH HAT for Raspberry Pi High Quality READY STOCK

⭐️⭐️Get your Maker pHAT directly from Cytron!⭐️⭐️

Maker pHAT is designed to:

✅Simplify to get started with Raspberry Pi without additional monitor, keyboard or mouse (Headless). 
✅Simplify learning electronics. Start coding right away and see your board lights up and plays sound with the press of a button. 
✅Simplify troubleshooting and prototyping. Not only do the onboard LEDs work as outputs, they can also act as indicators, clearly showing what's happening on that pin. 
✅Simplify proper shutdown using push button. Just press the button and it will shut down. 

Features:

📌Raspberry Pi Zero size, stack perfectly on to Pi Zero Series of SBC (Single Board Computer).
📌Compatible with standard size Raspberry Pi 3B/3B+, medium size Raspberry Pi 3A+ and smaller size Raspberry Pi Zero/W/WH.
📌Standard Raspberry Pi GPIO footprint.
📌LED array for selected GPIO pins (GPIO 17, 18, 27, 22, 25, 12, 13, 19).
📌3x on board programmable push buttons (GPIO 21, 19 and 20, need to configure as input pull up).
📌On board active buzzer (GPIO 26).
📌Proper label for all GPIOs, including SPI, UART, I2C, 5V, 3.3V, and GND.
📌Utilize USB Micro-B socket for 5V input and USB to UART communication.
📌USB serial facilitated by the CH340, Rev1.10 uses FT231X as the USB to UART
📌Input voltage: USB 5V, from computer, power bank or standard USB adapter.
📌PURPLE PCB!

Maker pHAT is compatible with:

⭐️Raspberry Pi Zero V1.3 (will need to solder 2x20 header pin - NOT included can consider Straight Pin Header (Male) 2x40 Ways)
⭐️Raspberry Pi Zero W (will need to solder 2x20 header pin - NOT included can consider Straight Pin Header (Male) 2x40 Ways)
⭐️Raspberry Pi Zero WH (Ready for plug and use)
⭐️Raspberry Pi 1 Model A+ (Will need 2x20 stacking header)
⭐️Raspberry Pi 3 Model A+ (Will need 2x20 stacking header)
⭐️Raspberry Pi 3 Model B (Will need 2x20 stacking header)
⭐️Raspberry Pi 3 Model B+ (Will need 2x20 stacking header)
⭐️Raspberry Pi 4 Model B 1GB (Will need 2x20 stacking header)
⭐️Raspberry Pi 4 Model B 2GB (Will need 2x20 stacking header)
⭐️Raspberry Pi 4 Model B 4GB (Will need 2x20 stacking header)

📦📦What's included📦📦
1 x Maker pHAT 
1 x 2x20 Stacking Header
1 x Reusable Box

📩 Email us at [email protected] for technical support 😊
☎️ Call us at 04-548 0668
🚚 Free shipping WITHOUT min. purchase for students & teachers (ONLY applicable on website purchase) 🤩
💻 Visit us at my.cytron.io for more product choices 😊